DICOM Settings (Configuring your ultrasound system)

Configuration instructions vary depending on the make and model of the imaging machine. Refer to the General instructions if your specific modality is not listed here; content will continue to be added to this section.

Articles

Uplink Port & IP Address
When we configure our ultrasound system, the first thing we do is enter the IP address and port number of the computer running Uplink. This information tells the ultrasound system where to send exam data. Port Number and IP Addre...
Setting up an Ultrasound System that is not Connected to the Network
In most cases, the ultrasound system and the server/computer running Tricefy Uplink are both connected to the Internet and the clinic's network (either wired or wirelessly). However, it is possible to connect the ultrasound system directly ...
Sending Reports on a new Voluson
PDF reports (and other non-DICOM) documents can be sent directly to Tricefy on Voluson (e series) BT19 and newer.   Learn how to send reports and PDF on older Volusons   To send a report, access the Worksheet/Report menu on your...
Sending Reports (& PDFs) to Tricefy
PDF reports (and other non-DICOM) documents cannot be sent to Tricefy using the standard DICOM sending destination. Instead, the ultrasound will send the documents to a network folder via the Export option.  From there, the uplink will automati...