Popular Articles

1. Tricefy Uplink & Downlink

   Last Updated: 02/07/2024
   Downloading Tricefy Uplink or Downlink  Windows Installer (current version 4.3.3.493) https://downloads.tricefy.com/tricefy_uplink/Uplink4Setup.exe  Mac OS Installer https://downloads.tricefy.com/tricefy_up...

2. GE Voluson Series (2015 models and older)

   Last Updated: 05/11/2023 in Ultrasound configuration (DICOM setup) Setting up your Ultrasound System GE Ultrasound Machines
   Fol low  the process below to configure your ultrasound system to send data to Tricefy. Select the Utility hard-button located on the machine: The Utility screen will display on the LCD monitor. Select System Setup : On the Syste...

3. Setting up your Ultrasound System

   Last Updated: 03/25/2024 in Ultrasound configuration (DICOM setup)
   Tricefy works with any imaging system and takes only a few seconds to configure.  To get started, select your device. If your device is not listed, refer to our general instructions:   See General Configuration Instructions...

4. Getting Started for New Users

   Last Updated: 08/29/2019
   Welcome to Tricefy! Here are few basic steps to help get you started: Step 1: Create Account Step 2: Install Uplink Step ...

5. Setting up an Ultrasound System that is not Connected to the Network

   Last Updated: 06/06/2022 in Ultrasound configuration (DICOM setup)
   In most cases, the ultrasound system and the server/computer running Tricefy Uplink are both connected to the Internet and the clinic's network (either wired or wirelessly). However, it is possible to connect the ultrasound system directly ...

6. Philips Affiniti & EPIQ Configuration

   Last Updated: 05/04/2017 in Ultrasound configuration (DICOM setup) Setting up your Ultrasound System Philips Ultrasound Machines
   Follow the process below to setup your ultrasound system.  1) Click the Support button in the upper-right hand corner of the machine: 2) press the Startup button on the touch panel 3) Select the Network/DI...

7. Uplink Port & IP Address

   Last Updated: 02/25/2018 in Ultrasound configuration (DICOM setup)
   When we configure our ultrasound system, the first thing we do is enter the IP address and port number of the computer running Uplink. This information tells the ultrasound system where to send exam data. Port Number and IP Addre...

8. Voluson Series using external Trice uplink

   Last Updated: 01/02/2024 in Ultrasound configuration (DICOM setup) Setting up your Ultrasound System GE Ultrasound Machines
   Fol low  the process below to configure your ultrasound system to send data to Tricefy. Select the Utility hard-button located on the machine: The Utility screen will display on the LCD monitor. Select Setup , followed by Connec...

9. GE LOGIQ A5/P5 Configuration

   Last Updated: 03/18/2021 in Ultrasound configuration (DICOM setup) Setting up your Ultrasound System GE Ultrasound Machines
   To configure your GE LOGIQ to send data to Tricefy: 1. Select the Utility hard-button located on the machine: 2. A list of tabs will display at the top of the screen.  Click Connectivity : 3. A sub-list of tab...

10. P Buttons / S Buttons/ Send Buttons / Acquire

    Last Updated: 09/10/2021 in Ultrasound configuration (DICOM setup) Setting up your Ultrasound System
    You can program a button on your ultrasound system to send study images Tricefy. P buttons -- Sends the image on the screen to the patient (or archive) End Exam -- Sends the entire study when the exam is complete This is no...

• ← Back
• Viewing 1 - 10 of 207
• More →