GE Ultrasound Machines

Voluson Series

Fol low the process below to configure your ultrasound system to send data to Tricefy. Select the Utility hard-button located on the machine: The Utility screen will display on the LCD monitor. Select Setup , followed by Connectiv...

Voluson with Tricefy Inside

GE Voluson ultrasound systems have Tricefy pre-installed. Additional software is not necessary in order to use Tricefy. Activate your account using the following steps: 1) Press the Utilities button on the front panel (this is a physical butt...

Vscan Air

Connecting your Vscan Air to Tricefy is very quick and easy. Using the DICOM Web Server built into the Vscan Air's is the preferred method to send studies to Tricefy as it will not require a separate app on the device. Please follow the instruct...

Export report PDFs to Tricefy - Map Network Drive

PDF report documents cannot be sent to Tricefy using the standard DICOM sending destination. Instead, the ultrasound will send the documents to a network folder via the Export option. From there, the uplink will automatically detect any content l...

Voluson SWIFT with Tricefy Inside

GE Voluson ultrasound systems have Tricefy pre-installed. Additional software is not necessary in order to use Tricefy. Activate your account using the following steps: 1) Access the Home screen The Home screen will display after startup...

LOGIQ E10 with Tricefy Inside

The GE LOGIQ E10 ultrasound systems have Tricefy pre-installed. Additional software is not required in order to use Tricefy, you can your account once the device has an internet connection without a firewall or anti-virus using the following ste...

Sending Ultasound Reports on newer Voluson E Series

Ultrasound PDF reports documents can be sent directly to Tricefy on Voluson E series BT19 and newer, including Voluson Expert 22+ series -- all without the need to map a network drive. Learn how to send reports and PDF on older Volusons To ...

GE Voluson Series (2015 models and older)

Fol low the process below to configure your ultrasound system to send data to Tricefy. Select the Utility hard-button located on the machine: The Utility screen will display on the LCD monitor. Select System Setup : On the System Set...

GE LOGIQ A5/P5 Configuration

To configure your GE LOGIQ to send data to Tricefy: 1. Select the Utility hard-button located on the machine: 2. A list of tabs will display at the top of the screen. Click Connectivity : 3. A sub-list of tabs wil...

GE Voluson 730 Configuration

Follow the process below to configure your ultrasound system to send data to Tricefy. First, press the Utilities button located in the upper-right corner of the LCD monitor, and select System Setup : The Setup screen has eight t...

Articles